Filter
Top Products
36
Operating Instructions and Parts Manual
Instructions d’Utilisation et Manual de Pièces
Manual de Instrucciones y Lista de Piezas
Notes
Notas
This manual contains safety,
operational and maintenance
information. Contact your Campbell
Hausfeld representative if you have
any questions.
Table of Contents
General Safety . . . . . . . . . . . . 1-3
Specifications . . . . . . . . . . . . . . . 2
Operating The Nailer . . . . . . . 4-7
Troubleshooting . . . . . . . . . . . . 7
Parts List . . . . . . . . . . . . . . . . .8-9
Warranty . . . . . . . . . . . . . . . . . 10
Description
This nailer is designed for use in
installing 3/4" and 1/2" thick
unfinished hardwood flooring. It can
be used to install pre-finished flooring
however caution must be used so the
finish is not damaged by the tool.
UNPACKING
When unpacking, check and make sure
that all the accessories are included. If
anything is missing or broken, please
call 1-800-543-6400 first for assistance.
General Safety
Information
This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger
indicates
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
Warning
indicates
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
Caution
indicates
a potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
Notice
indicates
important information, that if not
followed, may cause damage to
equipment.
CALIFORNIA PROPOSITION 65
You can create dust when
you cut, sand, drill or grind
materials such as wood, paint, metal,
concrete, cement, or other masonry.
This dust often contains chemicals
known to cause cancer, birth defects,
or other reproductive harm.
Wearprotective gear.
Operating Instructions and Parts Manual Model CHN50399
BUILT TO LAST
Flooring
Nailer / Stapler
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or
property damage! Retain instructions for future reference.
IN715200AV 3/07
© 2007 Campbell Hausfeld/Scott Fetzer
See Warranty on page 10 for important information about commercial use of this product.
For parts, product & service information
visit www.chpower.com
Locate model number on magazine
and date code on tool body; record
below:
Model No. ________________________
Date Code ________________
Retain these numbers for
future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.