Filter
Top Products
3
Operating Instructions and Parts Manual
Maintenance
Be sure the air filter is clean. A dirty air
filter restricts air flow and can cause the
motor to overheat.
IMPORTANT: Keep the unit at the
maximum distance from the spray area
to extend filter life.
Figure 3
Troubleshooting Chart
Symptom Possible Cause(s) Corrective Action
Poor air flow
Unusual grinding noise
1. Hose restricted or kinked
2. Restricted filter
Damaged turbine motor
1. Keep air hose straight
2. Clean or replace filter
Contact Service Center
Replacement Parts List
1 Filter MP3021 — — 1
Filter pack — HV012600AJ HV012600AJ 2
2 Hose 15’ MP3106 — — 1
Hose 25’ — HV012500AJ HV012500AJ 1
3 Quick connect coupler HV002200AV HV002200AV HV002200AV 1
4 Stub hose — HA222503AV HA222503AV 1
Ref
Part Number For Model Number
No. Description HV2000 HV2500 HV3000 Qty
MODEL HV2000
1. Remove the filter grille thumbscrew
with a screw driver to access the
filter (See Figure 3).
2. Clean the filter with mild soapy
water and pat dry.
3. Replace filter if built-up with paint.
MODEL HV2500 AND HV3000
1. Squeeze and pull to remove both
filters (See Figure 4).
2. Clean the filter with mild soapy
water and pat dry or replace filter if
built-up with paint.
3. Squeeze and tuck to install filter.
For Information About This Product
Call 1-800-626-4401
1
3
2
3
4
1
2
Model HV2000
Models HV2500 or HV3000
Figure 4
Filter
Housing
Thumbscrew
Accessories
1 5' Whip Hose (Use with any model) HV012400AJ 1
2 Multi-Purpose Case HV7008 1
Ref
No. Description Part Number Qty
www.chpower.com