Filter
Top Products
MA011-01 • 09/26/13
1.888.830.1326
5
Installing the Pull chain pendant -
Attach the pull chain pendants to the
end of the short chains coming from the
switch housing and the light kit. Turn on
power. Your installation is complete!
Installing the globe - Press the globe
(sold separately) and globe keeper ush
against the metal plate. Thread the light
pull chain through the hole in the center
of the nial cap and thread the fan pull
chain through the hole in the side of the
cap. Finally, thread only the light pull
chain through the hole in the nial and
screw the nial onto the threaded rod.
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
Globe
Globe
Keeper
Finial Cap
Finial
6
7
If necessary, attach the extension chain
provided to the fan pull chain coming
from the switch housing. Then feed the
end of the extension chain through the
grommeted hole in the light kit.
Grommeted
Hole
Light Pull
Chain
Fan Pull
Chain
5