Filter
Top Products
MA011-01 • 09/26/13
1.888.830.1326
7
TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED)
Installing the pull chain pendant -
Attach the pull chain pendants to the
end of the short chains coming from the
switch housing and the light kit. Turn
power on. Your installation is complete.
If necessary, attach the extension chain
provided to the fan pull chain coming
from the switch housing. Then feed the
end of the extension chain through the
grommeted hole in the light kit.
Grommeted
Hole
Light Pull
Chain
Fan Pull
Chain
6
Lift the light kit assembly up so that the
screw holes in the lower switch housing
line up with the holes in the upper switch
housing. Install the switch housing
screws and tighten securely.
Switch
Housing
Screw
5
8
Installing the globe - Press the globe (sold
separately) and globe keeper ush against
the metal plate. Thread the light pull chain
through the hole in the center of the nial cap
and thread the fan pull chain through the hole
in the side of the cap. Finally, thread only the
light pull chain through the hole in the nial
and screw the nial onto the threaded rod.
Globe
Globe
Keeper
Finial Cap
Finial
7