Filter
Top Products
MA011-01 • 09/26/13
1.888.830.1326
8
Using the single pin connectors, connect
the black or blue wire from the fan to the
black wire from the light kit. Connect the
white wire from the fan to the white wire
from the light kit.
Feed the wires through the switch
housing cap, washer, and nut. Then
install the switch housing cap by twisting
clockwise onto the threaded rod. Install
the washer and nut onto threaded rod
and tighten securely.
Threaded
Rod
Washer
and Nut
TYPE-C ASSEMBLY INSTRUCTIONS
If your fan does not have pin connectors on
the wires coming from the switch housing,
install the wiring harness provided. Using
the provided wire connectors connect the
white wire from the fan to the white wire
from the wire harness and connect the
black or blue wire from the fan to the black
wire from the wire harness.
Wire
Connector
Switch
Housing
Do not allow the light kit to hang
only by the wire connections!
1 2
3
Remove the screws attaching the LED
ring to the light kit cap. Do not discard the
screws.
Screws
Light Kit
Cap
LED Ring
4