Chauvet 1200E Work Light User Manual


 
Introduction
Legend™ 1200E Spot User Manual Rev. 03c -3-
2. Introduction
Product
Description
The Legend1200E Spot is a moving yoke fixture with a 1200 W short arc discharge
lamp. It contains an LCD control panel (display), through which all of the settings can
be set or modified.
This fixture can operate at 200~240 VAC, 50/60 Hz, wh
ich eliminates the need for a
voltage selection switch. The ballast and igniter in the lamp circuit are both of the
electronic type.
Features
23 or 31-channel DMX moving yoke
Pan 540 in 2.8 sec
Tilt 270 in 1.6 sec
Color wheel:
Seven colors + white (red, blue, pink, green, magenta, orange, and UV)
Split/linear colors
Rainbow color spin at variable speeds
Gobo wheel 1:
Indexed, rotating gobo wheel with gobo shake:
Six glass, slot-n-lock gobos + open (two multicolor, four B/W)
Gobo wheel spin at variable speeds
16-bit gobo rotation
Gobo wheel 2:
Indexed, rotating gobo wheel with gobo shake:
Six glass, slot-n-lock gobos + open (one multicolor, five B/W)
Gobo wheel spin at variable speeds
16-bit gobo rotation
Variable frost
Variable CTC filter (3,200~6,000 K)
CMY color mixing system with vector speed adjustments
3-facet, 5-facet, 3D, and infinite prism with macros
Variable shutter
Variable iris
Variable focus
Variable 16-bit dimming (0~100%)
Linear zoom (15~30)
Individual reset of pan/tilt, color, gobo, shutter, prism, focus
Move-in-black for pan/tilt, color, gobo
Remote fixture reset, lamp on/off, vector speed adjustments
Built-in movement macros with range adjustments
Built-in color macros
Additional Features
3-pin and 5-pin DMX connections
Two additional free glass gobos
User-configurable lamp ignition delay
User-configurable maintenance reminder
Electronic ballast with power factor correction
Electronic power supply
Automatic pan & tilt correction
Pan & tilt locks
Lamp and fixture usage timer
Power saver mode
Options
W-DMX (wireless DMX) receiver
W-DMX (wireless DMX) transmitter