Filter
Top Products
Intimidator™ Spot 150 User Manual 15 6/19/2009 9:08 AM
Menu Map
MAIN FUNCTION
SUB-FUNCTION
SELECTION
INSTRUCTION
1. DMX Address
Address
000 ~ 255
Sets the DMX starting address
2. Run
Fast
Sets the fixture to fast Auto mode
Slow
Sets the fixture to slow Auto mode
Sound
Sets the fixture to audio triggering Auto
mode
Econtr
Sets the fixture to operate with the Easy
Controller
Slave
Sets the fixture to receive signal from
another fixture (master/slave) or from a
DMX controller
3. Pan
Normal
Sets the Pan to normal operation
Reverse
Sets the Pan to inverted operation
4. Tilt
Normal
Sets the Tilt to normal operation
Reverse
Sets the Tilt to inverted operation
5. Display
Bright
Sets the display backlight to remain on
indefinitely
30-Close
Sets the display to turn off the back light
after 30 seconds
6. Pan Angle
540
Sets the Pan range to full
360
Limits the Pan range to 360° degrees
180
Limits the Pan range to 180° degrees
7. Tilt Angle
270
Sets the Tilt range to full
180
Limits the Tilt range to 180° degrees
90
Limits the Tilt range to 90° degrees
8. Channel
ADVANCED
12-channel 16-bit pan/tilt operation
Basic
8-channel 8-bit pan/tilt operation
9. Lamp Control
ON
Turns the lamp on
OFF
Turns off the lamp
10. Reset System
No
No function
Ok
Resets the fixture
11. Load Set
No
No function
Ok
Reset all settings to factory defaults