Filter
Top Products
Intimidator™ Spot 150 User Manual 9 6/19/2009 9:08 AM
Replacing Gobos
1) Be sure the fixture is not powered or connected to mains.
2) Remove the top cover by removing the 4 screws with a Phillips #2 screwdriver.
3) With your hand, move the gobo wheel to the desired gobo to change.
4) You may now replace the gobo easily by removing
the retaining ring. This may be done with a small tool.
5) Replace the new gobo and the retaining ring.
6) Replace top cover and 4 cover screws.
Top cover screws
2
Gobo wheel
4
Retaining ring
Gobo
1
2
3
4
5
6
7