Filter
Top Products
Page 10 of 13 Cubix™ 2.0 User Manual (Rev. 5)
DMX Channel Assignments and Values
7-CH
Channel Function Value Setting
1 Colors
000 004
No function
Side Lenses
005 028
Red
029 056
Green
057 084
Blue
085 112
Cyan
113 140
Purple
141
168
Yellow
169 197
White
198 224
3-Color switching
225 255
7-Color switching
2 Strobe
000 004
No function
005 255
0~30 Hz
3 Motor Rotation
000 127
Rotation with indexing
128 255
Back and forth with increasing
distance
4 Auto Programs
000 014
Blackout
Middle Lens
015
255
Auto Programs
5 Auto Program Speed
000
015
No function
016 255
0~100% (when Ch. 4 is
015~255)
6 Strobe
000 015
No function
016 255
0~30 Hz
7
Auto Programs
(All Lenses)
000 009
No function
All Lenses
010 250
Auto programs (slow~fast)
251 255
Sound active
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Mode
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until AUTO shows on the display.
2. Press <ENTER>.
Sound-Active
Mode
To enable the Sound-Active mode, do the following:
1. Press <MENU repeatedly until SNd shows on the display.
2. Press <ENTER>.
3. Turn the music on and adjust the sound sensitivity knob until the product starts
responding to the beat of the music.