Filter
Top Products
Cubix™ 2.0 User Manual (Rev. 5) Page 9 of 13
4. OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the display.
Please refer to the Product Overview to see the button locations on the control panel.
Button
Function
<MENU>
Press to find an operation mode or to back out of the current menu
option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
Mode
Programming Steps
Description
DMX Address 512 d__1-d512 Sets the DMX starting address
Auto Programs AUTO Sets Auto Program
Auto Program
Speed
S-- S__1-S100 Selects Auto Program speed (slow to fast)
Sound Active
Mode
SNd Sets Sound Active mode
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Cubix™ 2.0 uses up to 7 DMX channels in its 7-channel DMX mode, which defines the
highest configurable address to 506.
If you are not familiar with the DMX protocol, download the DMX Primer from the
CHAUVET® website.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.