Filter
Top Products
Q-Spot™ 150-LED User Manual 14 9/22/2009 3:57 PM
Menu Map
MAIN FUNCTION
SUB-FUNCTION
SELECTION
INSTRUCTION
1-Intro
1.1 Address
000 ~ 255
Sets the DMX starting address
1.2 Reset
Yes ~ No
Resets the fixture to the “home” position
1.3 Operation
DMX-512
Sets the fixture to DMX mode
Auto_1
Sets the fixture to hanging auto mode (for
placing on speaker)
Auto_2
Sets the fixture to floor standing auto mode
(pointing down)
Sound_1
Sets the fixture to hanging sound mode (for
placing on speaker)
Sound_2
Sets the fixture to floor standing sound mode
(pointing down)
Custom
Sets the fixture to run the user program
Test
Sets the fixture to run a standard test
program
Slave
Sets the fixture to respond to other “Master”
units
1.4 Channels
Advanced
8-bit pan/tilt operation
Basic
16-bit pan/tilt operation
1.5 Display
60 close
Turns the display backlight off after 60
seconds of being idle
Bright
Sets the display backlight to remain on
indefinitely
1.6 Info
Edition
Shows the software version
2-Invert
2.1 Pan
Normal
Sets the Pan operation: 0º ~ 530º
Reverse
Sets the Pan operation: 530º ~ 0º
2.2 Tilt
Normal
Sets the Pan operation: 0º ~ 270º
Reverse
Sets the Pan operation: 270º ~ 0º
2.3 Color
Step
Sets the COLOR wheel channel to locking
colors
Linear
Allows split color operation on the color wheel
channel
2.4 Use
No ~ Yes
Enables / disables all of the Invert functions:
<2.1>~<2.3>
3-Range
3.1 P/start
000 ~ 255
Sets the Pan starting range
3.2 P/Finish
000 ~ 255
Sets the Pan end range
3.3 T/start
000 ~ 255
Sets the Tilt starting range
3.4 T/Finish
000 ~ 255
Sets the Tilt end range
3.5 Use
No ~ Yes
Enables / disables all of the Range functions:
<3.1>~<3.4>
4-Special
4.1 Black
No ~ Yes
Allows the move-in-black function to save via
DMX
4.2 Reset
DMX
Allows the DMX remote address command to
be received
System
Prevents a remote reset commend from
being received
5-Edit
5.1 Step
0 ~ 255
Select which step to edit
5.2 Pan
000 ~ 255
Use the 9 different attributes of the fixture to
create a custom program
5.3 Tilt
5.4 X/Y_Speed
5.5 Color
5.6 Gobo
5.7 Gobo_Rot
5.8 Prism
5.9 Dimmer
5.10 Strobe
5.11 Time
000 ~ 255
Selects the duration of the step
5.12 Use
No ~ Yes
Enables / disables the custom program
6-Default
6.1 Default
No ~ Yes
Sets the fixture back to the factory defaults
(erases the custom programs)