Filter
Top Products
SKU 45690 PAGE 3
Rev 02b
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. GROUND THIS PRODUCT. The required electrical Power Cord Plug for this
product is a grounded, 230 Volt, 3-Prong Plug (not included). It is recommended
that only a qualified technician connect a Power Cord Plug to the Power Cord. Never
remove the grounding prong or modify the Plug in any way. Do not use adapter
plugs with this product. When in use, make sure this product is always plugged into
a grounded, 230 Volt, 3-hole electrical receptacle with an appropriate breaker switch
inline.
2. MAKE SURE THE CONTROL SWITCH (part #25) IS IN THE “OFF” POSITION
BEFORE PLUGGING IN THE POWER CORD. (See Figure D, and Assy.
Diagram.)
3. DO NOT ABUSE THE POWER CORD. Do not use the Cord to pull the 3-Prong Plug
from a power outlet. Keep Cord away from heat, oil, sharp edges, and moving parts.
Replace damaged Cord immediately. Route the Power Cord safely. Protect it from
being damaged by other equipment in the shop. Do not route the Cord where it can
be walked on or tripped over.
4. MAINTAIN A SAFE WORK ENVIRONMENT. Do not use this product in or near
damp or wet areas. Do not expose this product to rain. Keep work area well lit.
Make sure there is adequate surrounding work space. Use this product in a well
ventilated area. (Read Material Safety Data Sheets/MSDS for metals, coatings, and
cleaners.) Do not operate this product in the presence of flammable liquids, gases,
or dust. To avoid accidental electric shock, do not let your body come in contact with
grounded surfaces such as pipes, radiators, ranges and refrigerators. Always keep
a fire extinguisher nearby.
8. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
10. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace or
repair damaged or worn parts immediately.
11. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical
replacement parts. Only use accessories intended for use with this product. Approved
accessories are available from Harbor Freight Tools.
12. MAINTAIN THIS PRODUCT WITH CARE. Keep this tool clean and dry.
13. MAINTENANCE: For your safety, service and maintenance should be performed
regularly by a qualified technician.
14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applications for
which this product was designed. Do not use small equipment, tools or attachments
to do the work of larger industrial equipment, tools or attachments. Do not use this
product for a purpose for which it was not intended.