Filter
Top Products
SKU 66718 For technical questions, please call 1-800-444-3353. Page 12
TROUBLESHOOTING
Problem Possible Causes Likely Solutions
Battery Charger will
not start.
1.
connected to 120 volt, grounded,
electrical outlet.
No power at outlet.2.
Battery is cold or has not been 3.
used for an extended period.
Disconnected or poorly 4.
connected.
Check that Cord is plugged in.1.
Check power at outlet. If outlet is 2.
unpowered, unplug Battery Charger
and check circuit breaker. If breaker
is tripped, make sure circuit is right
capacity for Charger and circuit has no
other loads.
Press Reset Button (see paragraph 8 on 3.
page 8.)
Re-connect charger input cord.4.
Green and red
L.E.D.’s illuminate
simultaneously.
Battery is too cool or hasn’t been 1.
used for a lengthy period of time.
Battery is old or defective.2.
Press Reset Button as discussed in step 1.
#7 on pages 8 and 9 of this manual.
Press Reset Button as discussed in step 2.
#7 on pages 8 and 9 of this manual. If
necessary, replace battery.
Green and red
L.E.D.’s not
illuminating.
Improper or loose connection(s).1. Make sure all connections are properly 1.
and securely connected.
Charger becomes
warm or hot during
charging.
This is normal operation.1. No action needs to be taken.1.
Follow all safety precautions whenever diagnosing or servicing the
tool. Disconnect power supply before service.