Filter
Top Products
SKU 66718 For technical questions, please call 1-800-444-3353. Page 4
Charger or these instructions to
operate the product. Battery Char-
gers are dangerous in the hands of
untrained users.
Maintain the Battery Charger. d.
Check for misalignment or binding
of moving parts, breakage of parts
and any other condition that may
affect the Charger’s operation. If
damaged, have the Charger re-
paired before use. Many accidents
are caused by poorly maintained
products.
Use the Battery Charger and its e.
accessories in accordance with
these instructions, taking into ac-
count the working conditions and
the work to be performed. Use of
the Battery Charger for operations
different from those intended could
.
Service5.
Have your Battery Charger ser-a.
viced by a qualied repair person
using only identical replacement
parts. This will ensure that the safety
of the product is maintained.
Specic Safety Warnings
This Universal Battery Charger is 1.
designed for use with 4.8, 7.2, 9.6,
12, 14.4, and 18 volt NiMH or NiCd
batteries only. Never attempt to use
the Battery Charger with any other
battery types.
Do not attempt to charge a battery 2.
when the temperature is below 32°
Fahrenheit or above 104° Fahren-
heit. Damage to the Battery Charger,
Do not allow the BLACK and RED 3.
Charger Clips to touch one an-
other when the Battery Charger is
plugged into an electrical outlet.
Do not allow the two Charger Mag-
nets to touch one another when
the Battery Charger is plugged into
an electrical outlet.
Failure to adhere to these directions
can result in damage to the Battery
Charger, the battery being charged,
Maintain labels and nameplates on 4.
the Battery Charger. These carry
important safety information. If un-
readable or missing, contact Harbor
Freight Tools for a replacement.
Do not leave the Battery Charger 5.
unattended when it is plugged into
an electrical outlet.
DC Adapter from its electrical outlet
before leaving.
6. The Charger gets hot
during use. The Char-
ger’s heat can build up to
unsafe levels and create a
adequate ventilation, due to an elec-
trical fault, or if it is used in a hot
environment.
-
mable surface. Do not obstruct any
vents on the Charger. Especially
avoid placing the Charger on
carpets and rugs; they are not only
ammable, but they also obstruct
vents under the Charger.
Place the Charger on a stable, solid,
stable metal workbench or concrete