Filter
Top Products
SKU 67089 For technical questions, please call 1-800-444-3353. Page 4
Power tool use and care7.
Do not force the power tool. Use a.
the correct power tool for your ap-
plication. The correct power tool will
do the job better and safer at the rate
for which it was designed.
Do not use the power tool if the b.
Power Switch does not turn it on
and off. Any power tool that cannot
be controlled with the Switch is dan-
gerous and must be repaired.
Disconnect the Power Cord from c.
the power source before making
any adjustments, changing acces-
sories, or storing the power tool.
Such preventive safety measures
reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If dam-
aged, have the power tool repaired
before use. Many accidents are
caused by poorly maintained power
tools.
Keep cutting accessories sharp f.
and clean. Properly maintained cut-
ting accessories with sharp cutting
edges are less likely to bind and are
easier to control.
Use the power tool and its acces-g.
sories in accordance with these
instructions, taking into account
the working conditions and the
work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
Service8.
Have your power tool serviced by a.
a qualied repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Specic Safety Warnings
Maintain labels and nameplates on 1.
the power tool. These carry impor-
tant safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
Read and adhere to the instruction 2.
manual of the included 67104 Bat-
tery Charger (49) for important safety
warnings and instructions on how to
properly operate the Lithium Battery
Charger.
Read and adhere to the safety warn-3.
ings for the included 67120 Lithium
Battery Pack (38).
Do not use this Drill Driver Tool with 4.
any other Battery or Charger.
Hold power tools by insulated grip-5.
ping surfaces when performing
an operation where the tool may
contact hidden wiring. Contact with
a ″live″ wire will make exposed metal
parts of the tool ″live″ and shock the
operator.
Maintain labels and nameplates on 6.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.