Filter
Top Products
Page 7For technical questions, please call 1-800-444-3353.SKU 68887
Specifications
Electrical Rating 120V~ / 20A
Welding Output 60 ~ 120 A, AC
Capacity
18 gauge (0.048″) to 3/16″ (0.19″) mild steel only
Not for welding aluminum or stainless steel
Duty Cycle
20% @ 90A
(See explanation on page 14)
Open Circuit Voltage 27
KVA 2.38
Welder Tips / Wire Size Installed tip will accept .030″ to .035″ FLUX CORE wire
Wire Spool Capacity 4″ diameter / 2 lb. spool
Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch off and unplug the welder before assembly.
Cover Assembly
1. Slide the Handle into the slot on
the Cover from the back.
2. The notch on the front of the Handle should drop
into the slot in the Cover. Both ends of the Handle
should lay flush against the top of the Cover.
3. Secure with Screw at front of unit.
Handle
notch drops
into slot on
Cover here
Screw
Cover
SAFETYMAINTENANCE BASIC WELDINGWELDING TIPS SETUP