Filter
Top Products
Page 4SKU 90880
Battery Precautions
1. Read all instructions and warnings on the battery before charging the battery.
2. To avoid accidents, charge the supplied battery only. Do not use a different charger
with this battery.
3. Do not expose the battery to rain or wet conditions.
4. To avoid damage of cable and plug, never pull the cable to disconnect the charger.
5. Do not use the charger if the cable or plug are damaged.
6. Repairs should be carried out by a qualified technician.
7. Do not touch the battery poles with any conductive source.
8. Do not store the battery in a box with other metal objects; store the battery in the
carrying case.
9. Do not throw the battery in a fire or in the general trash. Contact your local hazardous
waste disposal authority for proper disposal.
10. Do not drain the battery completely before recharging. Recharge fully. Always use a
fresh battery when tool performance begins to diminish. Severe heat is most
destructive to a battery; the more heat generated, the faster the battery loses power. A
battery that gets too hot can be permanently damaged. Never over-discharge a battery
by using the tool even after tool performance is decreasing. Never attempt to
discharge a tool’s battery by continuing to pull the tool trigger. When tool performance
begins to diminish, stop the tool, recharge the battery and use the fresh battery for
optimal performance.
11. Recharge the battery monthly even if not used.
12. Always remove the battery from the Spray Gun before performing inspection,
maintenance, cleaning procedures, or storage.
Specific Safety Rules for the Spray Gun
1. Never point the Spray Gun towards people or animals.
2. The Spray Gun must be used only for paints and solvents with a 21 degree C
minimum flashpoint.
3. The high pressure spray can potentially cause severe skin damage, Never allow any
part of the body to come in contact with the spray.
4. In case of skin injection by the high pressure spray, contact a physician immediately.
The physician should be told the type of sprayed material involved.
5. Do not smoke or eat in the area where the Spray Gun is used.
6. Provide sufficient ventilation to keep the air in the spraying area free from the
accumulation of flammable vapors.
7. Do not spray any material of unknown composition.