Filter
Top Products
Page 5SKU 90880
8. Do not operate the Spray Gun without the nozzle Locknut (3) in place.
9. Never use gasoline or other flammable liquids to clean the Spray Gun. Fire or
explosion could occur. Damage to Spray Gun components could occur.
10. Always read the paint manufacturer’s thinning recommendations or instructions before
using paint or other materials.
11. Always carefully cover areas that are not to be painted to prevent property damage.
12. Stop using the Spray Gun if it becomes overly hot; allow the tool to cool down before
using it again.
WARNING: This product contains lead, which is a chemical known to the State of
California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code 25249.5,
et seq.
)
Unpacking
When unpacking, check to make sure the following parts are included. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Spray Gun
Viscosity Cup (30)
Valve (2)
Nozzle Extension
Side Handle (28)
Battery (26)
Charger Base (31)
AC Adapter (32)
Blow Mold Case (33)