Filter
Top Products
SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 6
Do not drill or break into existing walls, oors, or other blind areas where 11.
electrical wiring may exist. If this situation is unavoidable, disconnect all fuses
or circuit breakers feeding the worksite.
Use a metal detector to determine if there are gas or water pipes hidden 12.
in the work area or call the local utility company for assistance before
beginning the operation. Striking or cutting into a gas line will result in
explosion. Water entering an electrical device may cause electrocution.
Position yourself to avoid being caught between the Demolition Hammer 13.
or Auxiliary Handle and walls or posts. Should the Chisel become bound or
jammed in the work, the reaction of the tool could crush your hand or leg.
Do not strike the Chisel with a handheld hammer or sledge hammer when 14.
attempting to dislodge a bound or jammed Chisel. Fragments of metal from
the Chisel could dislodge and strike you or bystanders.
Never place the Demolition Hammer down until the Motor has come to a 15.
complete stop.
The Chisel may become hot after prolonged use. 16. When removing the Chisel
from the tool, avoid contact with skin and use proper protective gloves when
grasping the Chisel.
Do not force the Chisel into the workpiece when cutting. 17. Apply moderate
pressure, allowing the Chisel to cut without being forced.
Never attempt to remove material stuck in the moving parts of the 18.
Demolition Hammer while it is plugged in and running.
Always unplug the Demolition Hammer from its electrical outlet before 19.
performing and inspection, maintenance, or cleaning procedures.
Keep this product and all other tools and equipment away from children 20.
and other unauthorized people. Do not allow spectators in the work area.
Performance of this tool (if powered by line voltage) may vary depending 21.
on variations in local line voltage. Extension cord usage may also affect
tool performance.
Use the right tool for the job. 22. Do not attempt to force a small tool to do the
work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool, and do not use this tool for a purpose for which
it is not intended.
WARNING!23. Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm. Some examples of