Filter
Top Products
SKU 94882 PAGE 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures,
parts list and assembly diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep this manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Electrical Requirement 120 Volt / 60 Hz / 16 Amps (running)
Impactor Travel 2-3/8”
Overall Dimensions 25” L X 10-7/8” W X 9-3/8” H (hammer only)
Blows per minute 1100 - 2100
Retainer Style Spring loaded rotational lock (2 positions only)
Retainer Capacity 3/4” (19mm)
Bit hardness 46-56 HRC
Bit Dimensions: Chisel Bit: 3/4” Shank X 14-1/4” L
Bull Point Bit: 3/4” Shank X 1” W X 14-1/4” L
Noise Level 88 DBa @ 3 feet
Impact Energy 3.7 to 18.4 Ft/Lbs.
Tool Weight 33.75 Lbs.
NOTE: Plug this tool into a 20 Amp. dedicated circuit.
REV 07e, 08b