Filter
Top Products
SKU 94882 PAGE 9
6. WARNING! People with pacemakers should consult their physician(s) before using
this product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
WARNING: Always wear ANSI-approved impact safety goggles. Wear a full face shield
if you are producing metal filings or wood chips. Wear an ANSI-approved dust mask or
respirator when working around metal, wood, and chemical dusts and mists. Always wear
ear protection. Ear protection is required for any other persons in the work area.
WARNING: Be aware of flying concrete chips. Keep spectators clear of the work area.
WARNING: Do not operate this tool if you have back, neck, wrist, or other conditions or
injuries that will be aggravated by the jerking forces this tool exerts upon its operator.
WARNING: Always use the side handle when operating this tool.
NOTE: Use the weight of the Breaker Hammer to break concrete. Use the tool in the vertical
position whenever possible. This tool was intended to break larger pieces of concrete.
WARNING: If the Breaker Hammer ever gets out of your control, immediately release the
Switch (62).
VIBRATION HAZARD
This tool vibrates during use. Repeated or long-term exposure to vibration may
cause temporary or permanent physical injury, particularly to the hands, arms and
shoulders. To reduce the risk of vibration-related injury:
Anyone using vibrating tools regularly or for an extended period should first be 1.
examined by a doctor and then have regular medical check-ups to ensure medical
problems are not being caused or worsened from use. Pregnant women or people
who have impaired blood circulation to the hand, past hand injuries, nervous system
disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any
medical or physical symptoms related to vibration (such as tingling, numbness, and
white or blue fingers), seek medical advice as soon as possible.
Do not smoke during use. Nicotine reduces the blood supply to the hands and 2.
fingers, increasing the risk of vibration-related injury.
Wear suitable gloves to reduce the vibration effects on the user.3.
Use tools with the lowest vibration when there is a choice between different pro-4.
cesses.
Include vibration-free periods each day of work.5.
To reduce vibration, maintain the tool as explained in this manual. If any abnormal 6.
vibration occurs, stop use immediately.
REV 07j