Filter
Top Products
SKU 95065 For technical questions, please call 1-800-444-3353 Page 2
SPECIFICATIONS
Batteries 4.8 V NiCd Battery Pack
Charging Time No more than 10 hours
Charger Adapter Input: 120 VAC, 60 Hz
Output: 6 VDC, 300 mA
Speed 200 RPM
Chuck Hex drive
Features 6 – Driver bits included
Save This Manual
Keep this manual for the safety warn-
ings and precautions, assembly, operating,
inspection, maintenance and cleaning pro-
cedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions
listed below may result in electric
shock, re, and/or serious injury.
The term “power tool” in all of the
warnings listed below refers to your
line-operated (corded) power tool or
battery-operated (cordless) power
tool.
Work Area
Keep your work area clean and well
lit. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in
explosive atmospheres, such as in
the presence of ammable liquids,
gases, or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep bystanders, children, and visi-
tors away while operating a power
tool. Distractions can cause you to
lose control. Protect others in the work
area from debris such as chips and
1.
2.
3.
sparks. Provide barriers or shields as
needed.
Electrical Safety
Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges, and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
Grounded tools must be plugged
into an outlet properly installed and
grounded in accordance with all
codes and ordinances. Never remove
the grounding prong or modify the plug
in any way. Do not use any adapter
plugs. Check with a qualied electri-
cian if you are in doubt as to whether
the outlet is properly grounded. If the
tools should electrically malfunction or
break down, grounding provides a low
resistance path to carry electricity away
from the user.
The Charger Adapter is equipped
with a polarized plug (one blade is
wider than the other). This plug will
t in a polarized outlet only one way.
If the plug does not t fully in the outlet,
reverse the plug. If it still does not t,
contact a qualied electrician to install
a polarized outlet. Do not change the
plug in any way. Double insulation
eliminates the need for the three wire
grounded power cord and grounded
power supply system.
Do not abuse the Charger Adapter
charging cable. Never use it to carry
the tool or pull the Adapter from an
outlet. Keep the charging cable away
from heat, oil, sharp edges, or moving
parts. Replace Charger Adapter when
charging cable is damaged.
1.
2.
3.
4.
5.
REV 07l