Filter
Top Products
Page 10 For technical questions, please call 1-800-444-3353. SKU 9624
INSPECTION, MAINTENANCE,
AND CLEANING
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Unplug the Power Cord (43) from
its electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
BEFORE EACH USE,1. inspect the
general condition of the Drywall
Screwdriver. Check for loose screws,
misalignment or binding of moving parts,
damaged electrical wiring, damaged
accessories, and any other condition
that may affect its safe operation. If
abnormal noise or vibration occurs, have
the problem corrected before further use.
Do not use damaged equipment.
AT LEAST ONCE WEEKLY: 2. With the
Drywall Screwdriver running, blow dirt
and dust out of all air vents of the tool
with dry air. Also, the Depth Collar (2)
should be removed and drywall dust
blown out of the Clutch Housing (5).
Be sure to wear safety impact eye
goggles when performing these
procedures.
TO CLEAN THE EXTERIOR PLASTIC 3.
PARTS: Use only a clean cloth and
mild detergent to clean the body of
the Drywall Screwdriver. Do not use
solvents. Do not immerse any part of the
tool in liquid.
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
PARTS LIST AND ASSEMBLY DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY
REPAIRS TO THE PRODUCT, OR THAT HE
OR SHE IS QUALIFIED TO REPLACE ANY
PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL
RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT
PARTS THERETO.