Filter
Top Products
Page 2SKU 96375
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Construction
Formed/Stamped Steel Plate & Sheet
High Impact Thermoplastic Unit
Steel Bar
Rubber/Thermoplastic Grip
Copper Wiring
Finish Black Thermoplastic & Rubber Coating
Overall Dimensions
Station: 6-3/4” L X 4-1/2” W X 3-3/4” H
Handle: 7-3/8” L X .920”
Tip: 1-11/16” L X .238”
Temperature Range
200º~480ºC (7 settings)
392º~896ºF (6 settings)
Power Source 110 VAC//60 Hz
Power Cord 3’9” 18 AWG X 3C
Weight 4.2 Pounds
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Keep children and visitors away while operating this tool. Distractions can
cause you to lose control. Never allow children to operate the Soldering Station.
Do not operate the Soldering Station in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust, or near flammable items. The
intense heat generated by the Soldering Station can ignite flammable materials.
1.
2.
3.