Filter
Top Products
Page 6SKU 96531 For technical questions, please call 1-800-444-3353.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the tool. These carry important safety infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Avoid unintentional starting. Prepare to begin work before turning on the tool.
Do not leave the tool unattended when it is plugged into an electrical outlet. Turn
off the tool, and unplug it from its electrical outlet before leaving. Make sure sol-
dering wire is not connected to tool that is plugged in.
Use clamps (not included) or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
Use in well-ventilated area only and keep out of reach of children.
People with pacemakers should consult their physician(s) before use. Electro-
magnetic elds in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure.
WARNING: This product, when used for welding, plasma cutting, soldering,
or similar applications, produces chemicals known to the State of California to
cause cancer and birth defects (or other reproductive harm). (California Health &
Safety Code § 25249.5, et seq.)
Use caution when handling the Soldering Tip; it comes to a sharp point and is
especially dangerous when heated. The soldering tip can generate temperatures
up to 896°F, always use caution when working with this tool and keep ammable
items at a clear, safe distance.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
GROUNDING
Improperly connecting grounding wire can result in electric
shock.
Check with qualied electrician if you are in doubt as to
whether outlet is properly grounded. Do not modify power
cord plug provided with the tool. Never remove grounding
prong from the plug. Do not use tool if power cord or plug is
damaged. If damaged, have it repaired by a service facility
1.
2.
3.
4.
5.
6.
7.
8.
9.
WARNINGWARNING