Filter
Top Products
Page 4SKU 98113 For technical questions, please call 1-800-444-3353.
Maintain the Worklight. Check for d.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
Worklight’s operation. If damaged,
have the Worklight repaired before
use. Many accidents are caused by
poorly maintained battery operated
power tools.
Use the Worklight in accordance e.
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the Worklight for operations differ-
ent from those intended could result
in a hazardous situation.
Battery tool use and care5.
Recharge only with the AC/DC a.
Adapter (17) or Cigarette Lighter
Adapter (16) specied by the man-
ufacturer. An Adapter that is suitable
for one type of Battery Pack may
create a risk of re when used with
another type of Battery Pack.
Use this Worklight only with the b.
Battery Pack (12) included with
this product. Use of any other Bat-
tery Pack may create a risk of injury
and re.
Under abusive conditions, liquid c.
may be ejected from the Battery
Pack (12). Avoid contact. If con-
tact accidentally occurs, ush with
water. If liquid contacts eyes, ad-
ditionally seek medical help. Liquid
ejected from the Battery Pack may
cause irritation or burns.
Service6.
Have your Worklight serviced by a a.
qualied repair person using only
identical replacement parts. This
will ensure that the safety of the tool
is maintained.
Specic Safety Warnings
Maintain labels and nameplates on 1.
the Worklight. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
This Worklight contains a sealed lead 2.
Battery Pack (12). Do not dispose
of an old Battery Pack in re to avoid
explosion and possible personal
injury. Recycle old Battery Packs ac-
cording to local solid waste authority
procedures. NOTE: This Battery
Pack is not replaceable.
Avoid unintentional starting. Prepare 3.
to begin work before turning on the
Worklight.
Do not leave the Worklight unat-4.
tended when it’s AC/DC Adapter (17)
or Cigarette Lighter Adapter (16) is
plugged into an electrical outlet. Turn
off the tool, and unplug the AC/DC
Adapter or Cigarette Lighter Adapter-
from its electrical outlet before leav-
ing.
5. The AC/DC Adapter (17)
and Cigarette Lighter
Adapter (16) get warm
during use. The Adapters’
heat can build up to unsafe levels
and create a re hazard if they do not
receive adequate ventilation, due to
an electrical fault, or if they are used
in a hot environment.
Do not place the Adapters on a am-
mable surface. Especially avoid
placing the Adapters on carpets,
rugs, and car seats. They are not
only ammable, but they also