Filter
Top Products
Page 4SKU 97641
For technical questions, please call 1-800-444-3353.
Disconnect the Power Cord Plug from the power source before making any 3.
adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally. Always unplug the tool
from its electrical outlet before performing any inspection, maintenance, or
cleaning procedures.
Store Lamp out of reach of children and other untrained persons. 4. Tools are
dangerous in the hands of untrained users.
Check for misalignment or binding of moving parts, breakage of parts, and any 5.
other condition that may affect the Lamp’s operation. If damaged, have the
Lamp serviced before using. Many accidents are caused by poorly maintained
tools. Do not use a damaged tool.
Use only light bulbs that are recommended by the manufacturer for your model. 6.
New bulbs should only be installed by a qualified electrical technician.
Only mount Lamp to provided stand.7.
SERVICE
Service on the Lamp must be performed only by qualified repair personnel. 1.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
When servicing this tool, use only identical replacement parts. Follow 2.
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the tool. 1. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Always keep the extension cord away from moving or hot parts on the tool.2.
Use only on a flat, level surface able to support the weight of the Lamp.3.
Never leave the Lamp unattended when it is plugged into an electrical outlet. 4.
Turn off the tool, and unplug it from its electrical outlet before leaving.
Allow to cool completely before moving, maintaining or storing Lamp.5.
Keep children away from this lamp, especially when it is in use, or still hot.6.
Follow all precautions provided with paint used.7.
Do not place closer than 12 inches from surface being dried.8.