Filter
Top Products
Page 7SKU 97641
For technical questions, please call 1-800-444-3353.
ASSEMBLY INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram near the end of this manual.
1. WARNING! Make sure the Power Switch on the Lamp Head (9) is in the
“OFF” position and that the Lamp is unplugged from the electrical outlet before
assembling or making any adjustments to the tool. (See Figure A, below.)
Insert the Casters (3) into the ends of the Legs (2). Using a wrench (not 2.
included), use the included nuts, bolts and washers to fasten the Casters to the
Legs. CAUTION: The Casters do not come with locks, so be sure to position the
Lamp on a level surface during use to prevent rolling.
Set the four legs upright and using the Leg Bolts (4), washers and nuts, fasten 3.
each leg to the Bottom Pole (1). (See Figure B, below.)
Figure A
Figure B