Filter
Top Products
Page 8SKU 97641
For technical questions, please call 1-800-444-3353.
4. Slide the Top Pole (5) onto the top of the Bottom Pole (1), making sure the screw
holes on the Top and Bottom Poles align. (See Figure C, below.) Using a
Phillips Head screwdriver (not included), fasten the Top Pole to the Bottom Pole.
5. Slide the Connector (6) onto the Top Pole (5). Use the handle to lock the
Connector in place. Using the Connector Bolt (7) and Wing Nut (8), fasten the
Lamp Head (9) to the Connector. Once the Lamp Head is set at the required
angle and the Connector adjusted to the proper height, insert the plug at the end
of the Power Cord (10) into the nearest outlet. (See Figure D, below.)
Figure C
Figure D