120
121
Cisco Network Modules
16-port Cisco EtherSwitch
Service Module with
8023af Support
The 16-port EtherSwitch
service module provides
16 10/100 8023af-capable
ports plus one 10/100/1000
non-powered port
Integrated Switching
3800 Series–123(14)T
2811, 2821, 2851–123(14)T
Inline power support
requires an upgrade (to
PWR-xxxx-AC-IP) to the
internal router power
supply
Cisco inline power available
on Cisco 2811, 2821, 2851,
and 3800 Series Routers
IEEE 8023af (PoE) support
is available on the Cisco
2811, 2821, 2851, and 3800
Series Routers only
The EtherSwitch service
modules run independent
of the host router IOS
and require their own IOS
images These modules
utilize the same IOS
images as the Catalyst
3750 IOS images A
version of Catalyst 3750
IOS 122(25)EZ or higher
must be used with the
EtherSwitch service
modules in addition to the
minimum IOS of the host
router IOS
24-port Cisco EtherSwitch
Service Module with
8023af Support
The 24-port EtherSwitch
service module provides
23 10/100 8023af-capable
ports plus one 10/100/1000
8023af capable port
Integrated Switching
3800 Series–123(14)T
2821 and 2851–123(14)T
Inline power support requires
an upgrade (to PWR-xxxx-AC-
IP) to the internal router power
supply
Only supported in NME-X
slots (not supported in NM
or NME slots)
The EtherSwitch service
modules run independent
of the host router IOS
and require their own IOS
images These modules
utilize the same IOS
images as the Catalyst
3750 IOS images A
version of Catalyst 3750
IOS 122(25)EZ or higher
must be used with the
EtherSwitch service
modules in addition to the
minimum IOS of the host
router IOS
Cisco Network Modules
16-port 10/100
EtherSwitch Network
Module with Inline Power
and GE
Provides 16 switch ports
with inline power support,
one GbE port and one
internal port to the router
engine Features include
8021p prioritization and
80211q VLAN, and 8021d
Spanning-Tree Protocol
LAN Switching
LAN-to-LAN Routing
Inter-VLAN Routing
IP Telephony
3800 Series–123(11)T
3700 Series–122(8)T
2811, 2821, and 2851–
123(8)T4
2691–122(8)T
2600XM Series–122(8)T1
This is a bundle of one
NM-16-ESW, one
GE-DCARD-ESW and one
PPWR-DCARD-16ESW
Requires an inline power
supply upgrade (internal
for Cisco 2800 or 3800
Series)
Inline Power Daughter Card
for 16-port EtherSwitch
Network Module
Enables inline power
capability to the
NM-16ESW Note that a
power supply is required
LAN Switching
LAN-to-LAN Routing
Inter-VLAN Routing
IP Telephony
3800 Series–123(11)T
3700 Series–122(8)T
2811, 2821, and 2851–
123(8)T4
2691–122(8)T
2600XM Series–122(8)T1
Requires a 16-port 10/100
EtherSwitch Network
Module
Requires an internal power
supply when installed in
Cisco 2800 or Cisco 3800
Series Routers
1000BASE-T Daughter
Card for EtherSwitch
Modules
Provides one gigabit
port for a le server or
intra-chassis stacking of
EtherSwitch modules
LAN Switching
LAN-to-LAN Routing
Inter-VLAN Routing
IP Telephony
3800 Series–123(11)T
3700 Series–122(8)T
2811, 2821, and 2851–
123(8)T4
2691–122(8)T
2600XM Series–122(8)T1
Requires a 16- or
36-port 10/100
EtherSwitch module with
an available GbE port slot