Cisco Interface Cards
The Cisco HWIC-AP-G
80211b/g and
HWIC-AP-AG 80211a/b/g
are wireless LAN
interface cards in the
HWIC (High-Speed WAN
Interface Card) form factor
providing integrated
access point function-
ality in the Cisco 1800
(modular), Cisco 2800,
and Cisco 3800 Integrated
Services Routers
The Cisco HWIC-AP-G
supports IEEE 80211b/g
and has a single radio that
operates in the 24 GHz
band supporting up to
54 Mbps speeds The
Cisco HWIC-AP-AG
supports IEEE 80211a/b/g
and has two radios for
simultaneous operation
in the 24 GHz and 5 GHz
bands supporting up to
108 Mbps speeds
The Cisco HWIC access
points come with a
pair of RP-TNC antenna
connectors for both
24 GHz single-radio or
simultaneous 24 and
5 GHz radio operation,
providing range and
coverage versatility
Wireless LAN
3800 Series–124(2)T
2800 Series–124(2)T
1800 (modular) Series–
124(2)T
Enterprise branch ofce
and small- to medium-sized
business customers can
run concurrent services of
Layer 3 routing, security,
Layer 2 switching and now
IEEE 80211 wireless LAN
functionality in a single
platform This combination
offers ease of conguration,
deployment, and
management while
delivering the performance,
security, and versatility that
Cisco Integrated Service
Routers provide
(AIR-ANTxxxx)
Cisco 24 and 5 GHz
access point antennas,
including single mode and
dual mode antennas with
RP-TNC connectors
Wireless LAN
3800 Series with HWIC-AP
2800 Series with HWIC-AP
1800 (modular) Series with
HWIC-AP
1800W (xed) Series
870W (xed) Series
Aironet Series access
points
External antennas and
cables are ideal for
antenna installation
outside equipment rooms
to optimize wireless
LAN coverage and
performance
The HWIC-AP-G and
HWIC-AP-AG modules
are shipped with a pair
of dipole antennas unless
optional antennas are
selected
Cisco Interface Cards
One-slot GbE SFP
Provides one small form
factor pluggable (SFP)
slot to carry any standard
copper or optical Cisco
SFP
Inter-VLAN Routing
LAN-to-LAN Routing
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
The HWIC-1GE-SFP
provides a single slot for
a SFP and has no physical
interface on board It
requires a SFP that must
be purchases separately
Two-port Layer 3 Fast
Ethernet High-speed WAN
Interface Cards for Cisco
3800 Series Integrated
Services Routers
The new HWIC provides
additional Layer 3 routed
ports with features
equivalent to those on
the motherboard of the
Integrated Services
Routers These Fast
Ethernet interfaces can
be used for physical LAN
segregation, creation of a
demilitarized zone (DMZ),
or as a WAN interface
Broadband customers
can use them to connect
to an alternate provider
that delivers service on an
Ethernet port
The Layer 3 Cisco 2- port
Fast Ethernet High-Speed
WAN interface cards
(HWICs) supported on
the Cisco 3800 Series
Integrated Services
Routers offer small-to-
large-sized businesses and
enterprise branch-ofce
customers the option to
add Layer 3 routed ports
with many advanced
features, including quality-
of-service (QoS) and
rate-limiting capabilities
124(11)XJ
Will move to next T train in
April 2007
