Filter
Top Products
ADDITIONAL RULES FOR SAFE OPERATION cont.
6. INSPECT the tool cords periodically and if damaged have them repaired
at your nearest Sears Service Center. ALWAYS BE!AWARE of the cord location.
7. ALWAYS check the tool for damaged parts. Before further use of the tool,
a guard or other part that is damaged should be carefully checked to
determine if it will operate properly and perform its intended function. Check
for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. A guard or other part that is
damaged should be properly repaired or replaced at a Sears Service center.
8. SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to
instruct others who may use this tool. If someone borrows this tool, make
sure they have these instructions also.
/_k WARNING: This power tool should NEVER be connected to the power
source when you are assembling parts, making adjustments, installing or
removing sandpaper, cleaning or when it is not in use. Disconnecting the sander
will prevent accidental starting, which could cause serious personal injury.
1. Remove the sander from the carton and inspect it carefully to make sure
that no breakage or damage has occurred during shipping.
2. Do not discard any of the packing materials until all parLs are accounted for.
3. Included with your sander is a cyclonic dust box assembly.
4. 2 discs of hook and loop sandpaper are included; one fine grit, and one medium grit.
5. Dual Dust Port Vac Adapter is included.
6. If any of the parts are damaged or missing (refer to PARTS LIST below), return the
sander to your nearest Sears store or Craftsman outllet to have the sander replaced.
/_, WARNING: If any parts are missing, DO NOT operate this power tool until
the missing parts are replaced. Failure to do so couldl result in possible serious
personal injury.
10