Filter
Top Products
12
Product Specifications
Craftsman Impact Wrench
ACCESSORIES
The recommended 1/2" drive impact
sockets are currently available at Sears
Retail Stores.
WARNING: Use of hand socket
will cause premature failure of
socket and possible injury to the
user.
WARNING: Do not at any time
let brake fluids, gasoline,
petroleum-based products,
penetrating oils, etc. come in
contact with plastic parts. They
contain chemicals that can
damage, weaken, or destroy
plastic.
Do not abuse power tools. Abusive
practices can damage tool as well as
work piece.
Only the parts shown on the parts list
are intended to be repaired or replaced
by the customer. All other parts should
be replaced at a Sears Service center.
WARNING: Do not attempt to
modify this tool or create
accessories not recommended for
use with this tool. Any such
alteration or modification is misuse
and could result in a hazardous
condition leading to possible
serious personal injury.
BATTERIES
The battery pack for your impact
wrench is equipped with nickel-cad-
mium rechargeable batteries. Length of
service from each charging will depend
on the type of work you are doing.
The batteries in this tool have been
designed to provide maximum trouble
free life. However, like all batteries, they
will eventually wear out. Do not
disassemble battery pack and attempt
to replace the batteries.
WARNING: Handling of these
batteries, especially when wearing
rings and jewelry, could result in a
serious burn.
MAINTENANCE
Model 310.26825
Motor voltage 18 VDC
Square drive size 1/2"
Tightening torque* 180 ft. lb.
Sound pressure level** 96 dbA
Sound power level 109 dbA
Vibration Level*** 5.5 m/sec
2
Free speed 0–2200 RPM
Impact per minute 2220 IPM
Weight with one battery
pack
6.5 lbs.
Weight of one battery pack 2.4 lbs.
Current draw, free speed 8.7 A
Current draw during
impacting
38 A
*Output torque is tested with Skidmore mode
RL with 3/4" bolt (impacting for 5 seconds).
**Sound levels are tested per ISO standards
3744 and Pneurop test code PN8NTC1. Tool
loaded per ISO standard 8662.
***Vibration level tested per ISO standard 8662-8.
Charger
Item No.
9
-11040 (981399-001)
Charging Voltage 9.6 - 24 V
Charge Rate 1 hr
Battery Pack
Item No. 9
-11034 (981404-001)