Filter
Top Products
4
DEFINITIONS
A. DANGER: Failure to obey a
safety warning will result in serious
injury to you or to others. Always
follow the safety precautions to
reduce the risk of fire, electric
shock and personal injury.
B.
WARNING: Failure to obey a
safety warming can result in
serious injury to you or to others.
Always follow the safety
precautions to reduce the risk of
fire, electric shock and personal
injury.
C.
CAUTION: Failure to obey a
safety warning may result in
property damage or personal
injury to you or to others. Always
follow the safety precautions to
reduce the risk of fire, electric
shock and personal injury.
D.
NOTE: Advises you of information
or instructions vital to the operation
or maintenance of the equipment.
Tool Use and Care
■ Use clamps or other practical
way to secure and support the
workpiece to a stable platform.
Holding the work by hand or
against your body is unstable and
may lead to loss of control.
■ Do not force tool. Use the
correct tool for your application.
The correct tool will do the job
better and safer at the rate for
which it is designed.
■ Do not use tool if switch does
not turn it on or off. A tool that
cannot be controlled with the
switch is dangerous and must be
repaired.
■ Disconnect battery pack from
tool or place the switch in the
locked or off position before
making any adjustments,
changing accessories, or
storing the tool. Such preventive
safety measures reduce risk of
starting the tool accidentally.
■ Store idle tools out of reach of
children and other untrained
persons. Tools are dangerous in
the hands of untrained users.
■ When battery pack is not in use,
keep it away from other metal
objects like: paper clips, coins,
keys, nails, screws, or other
small metal objects that can
make a connection from one
terminal to another. Shorting the
battery terminals together may
cause sparks, burns, or a fire.
■ Maintain tools with care. Keep
cutting tools sharp and clean.
Properly maintained tools, with
sharp cutting edges are less likely
to bind and are easier to control.
■ Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
affect the tool’s operation. If
damaged, have the tool serviced
before using. Many accidents
are caused by poorly maintained
tools. Use only accessories that
are recommended by the
manufacturer for your model.
Accessories that may be suitable
for one tool, may create a risk of
injury when used on another tool.
Service
■ Tool service must be performed
only by qualified repair
personnel. Service or
maintenance performed by
unqualified personnel could result
in a risk of injury.
■ When servicing a tool, use only
identical replacement parts.
Follow instructIons in the
Maintenance section of this
manual. Use of unauthorized
parts or failure to follow
Maintenance Instructions may
create a risk of shock or injury.