Filter
Top Products
SWITCH
See Figure 2.
To tum your drill ON, depress the switch tdgger. To
tum itOFF, release the switch trigger.
CENTERPOSmON
(LOCK)
SELECTOR
SWITCHTRIGGER
Fig. 2
VARIABLE SPEED
This tool has a variable speed switch that delivers
higher speed and torque with increased trigger
pressure. Speed is controlled by the amount of switch
trigger depression.
Note: You might hear a whistling or ringing noise from
the switch dudng use. Do not be concerned, this is a
normal part of the switch function.
SWITCH LOCK
See Figure 3.
The switch tdgger can be locked in the OFF position.
This feature can be used to prevent the possibilityof
accidental starting when not in use. To lock switch
trigger, place the direction of rotation selector in
center position.
SELECTOR
FORWARD
CENTERPOSmON
(LOCK)
SWITCHTRIGGER Fig. 3
WARNING: Battery tools are always in
operating condition. Therefore, switch should
always be locked when not in use or carrying at
your side.
REVERSIBLE
See Figure 3.
This tool has the feature of being reversible. The
direction of rotation is controlled by a selector located
above the switch tdgger. With the ddll held in normal
operating position, the direction of rotation selector
should be positioned to the left of the switch for
drilling. The ddlling direction is reversed when the
selector is to the right of the switch. When the selector
is in center position, the switch trigger is locked.
_lb CAUTION: To prevent gear damage, always
allow chuck to come to a complete stop before
changing the direction of rotation.
To stop, release switch tdgger and allow the chuck to
come to a complete stop.
8