Filter
Top Products
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and
the explanations with them, deserve your careful attention and understanding. The safety warnings do
not by themselves eliminate any danger. The Instructions or warnings they give are not substitutes for
proper accident prevention measures.
SYMBOL
&
MEANING
SAFETY ALERT SYMBOL:
Indicatesdanger,wamingor caution. May beusedinconjunctionwithothersymbolsorpicto-
graphs.
A
DANGER: Failure to obey a safety waming will result in serious injuryto yourself or to others.
Always follow the safety precautions to reduce the riskof fire, electric shock and personal injury.
&
WARNING: Failure to obey a safety waming can result in serious injuryto yourself or to others.
Always follow the safety precautions to reduce the riskof fire, electdc shock and personal injury,
&
CAUTION: Failure to obey a safety waming may result in property damage or personal injury to
yourself or to others. Always follow the safety precautions to reduce the riskof fire, electric shock
and personal injury,
Note: Advises you of information or instructionsvital tothe operation or maintenance ofthe equipment.
IMPORTANT
Servicing requires extreme care and knowledge of the system and should be performed only by a qualified
service technician. For service we suggest you return the tool to your nearest Sears store for repair. Always use
original factory replacement parts when servicing.
_k WARNING: Do not attempt to operate this tool •
until you have read thoroughly and understand
completely all instructions, safety rules, etc.
contained in this manual. Failure to comply can
result in accidents involving firs, electdc shock, •
or serious personal injury. Save owner's manual
and review frequently for continuing safe
operation, and instructing others who may use
this tool.
READ ALL INSTRUCTIONS
KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the saw's applications
and limitations as well as the specific potential
hazards related to this tool.
• GUARD AGAINST ELECTRICAL SHOCK BY
PREVENTING BODY CONTACT WITH
GROUNDED SURFACES. For example; pipes,
radiators, ranges; refrigerator enclosures.
• KEEP GUARDS IN PLACE and in good working
order.
REMOVE ADJUSTING KEYS AND
WRENCHES. Get in the habit of checking to see
that hex keys and adjusting wrenches are
removed from tool before turning it on.
KEEP THE WORK AREA CLEAN. Cluttered
work areas and work benches invite accidents.
DO NOT leave tools or pieces of wood on the
saw while it is in operation.
DO NOT USE IN DANGEROUS ENVIRON-
MENT. Do not use power tools near gasoline or
other flammable liquids, in damp or wet loca-
tions, or expose them to rain. Keep the work
area well lit.
• KEEP CHILDREN AND VISITORS AWAY. All
visitors should wear safety glasses and be kept a
safe distance from work area. Do not let visitors
contact tool or extension cord while operating.
• MAKE WORKSHOP CHILD-PROOF with
padlocks and master switches or by removing
starter keys.
• DO NOT FORCE THE TOOL. It will do the job
better and safer at the rate for which it was
designed.
• USE THE RIGHT TOOL. Do not force the tool or
attachment to do a job it was not designed for.
Don't use it for a purpose not intended.
• USE THE PROPER EXTENSION CORD. Make
sure your extension cord is in good condition.
H
3