Filter
Top Products
_1_ WARNING: Your drill should never be connected to the power source
when you are assembling parts, making adjustments, installing or removing
bits, cleaning it, or when it is not in use. Disconnecting the drill will prevent
accidental starting, which could cause serious personal injury.
When unpacking the box, do not discard any packing materials until all of the
contents are accounted for:
1. Carefully lift the drill out of the carton and place it on a stable, flat surface.
2. Open the color box to locate the following:
* 1 drill
* Operator's manual
3. Inspect the items carefully to make sure that no breakage or damage has
occurred during shipping. If any of the items mentioned is missing, (refer
to "PARTS LIST" illustration), return the drill to your nearest Sears store or
Craftsman outlet to have the drill replaced.Carefully remove the tool and any
accessories from the box. Make sure that all items listed in the packing list
are included.
,_ WARNING: If any part is broken or missing, do not attempt to assemble the
drill, plug in the power cord, or operate the drill until the broken or missing part
has been replaced. Failure to do so could result in possible serious injury.
CARTON CONTENTS/LOOSE PARTS (Fig. 1)
Fig. 1
Drill
1
KNOW YOUR DRILL (Fig.2)
Before attempting to use this drill, familiarize yourself with all its operating
features and safety requirements.
_1_ WARNING: Do not allow familiarity with your drill to make you careless.
Remember that a careless fraction of a second is sufficient to inflict severe
injury.
17217 Manual Revised 09-0708 Page 8