Filter
Top Products
Fig. 2
Built-in belt chip
Lock-on button
Cord guard
Keyless chuck
Trigger switc
Forward/reverse
switch
PRODUCT SPECIFICATIONS
Motor 120V~60Hz, 5.2A
No Load Speed 0-2500 (RPM)
Chuck 3/8" (10ram)
Cord length 6'
Weight 3.1 Ibs
WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual as well as knowledge of the
project you are attempting. Before use of this product, familiarize yourself with
all operating features and safety rules.
VARIABLE=SPEEDTRIGGER SWITCH
To start the drill, press the trigger switch. To stop the drill, release the trigger
switch.
The variable-speed trigger switch delivers higher speed with increased trigger
pressure and lower speed with decreased trigger pressure.
LOCK=ON BUTTON
Squeeze the trigger switch and depress the "Lock-on" button.
FORWARD/REVERSE SWITCH
To use the drill in the forward position, push the switch to the left. To use the drill
in the reverse position, push the switch to the right.
KEYLESS CHUCK
For quick and easy bit changes.
17217 Manual Revised 09-0708 Page 9