Filter
Top Products
9, Integrated switch shield prevents dust from accumulating in the sockets.
10. Dust Collection/Guard reduces dust dispersal,
11. Above-the-table height adjustment: the bit height can be adjusted by turn..
ing the adjustment knob clockwise or counterclockwise with a hex wrench (5
inches long and 5mm in diameter, not included). This feature functions only
when using the Craftsman router supplied with this table (model 17541) or the
following Craftsman routers: models 17542 and 17543.
_, WARNING: If any parts are missing, DO NOT attempt to assemble, install,
or use your router table until the missing parts have been found or replaced and
your router table has been properly and correctly assembled according to this
product manual.
• In order to simplify handling and to minimize any damage that may occur dur-
ing shipping, your router table comes partially assembled.
* Separate all parts from the packaging materials and check each part against
the illustration and the parts list on page 13 to make sure that all parts have
been included. Do this before discarding any of the packaging material.
28180 Manual_Revised_07-0228 Page12