Filter
Top Products
Warranty ......................................... 2
Safety Rules ...................................... 2
Unpacking ....................................... 2
Assembly ...................................... 2-3
Operation ...................................... 3-4
Maintenance ..................................... 4
Parts Illustration and List ............................ 4
Espa_ol ........................................ 5-7
ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL
If this Craftsman tool fails due to a defect in material or
workmanship within one year from the date of purchase CALL
1-800-4-MY-HOME® TO ARRANGE FOR FREE REPAIR.
If this tool is used for commercial or rental purposes, this war-
ranty will apply for only ninety days from the date of purchase.
This warranty applies only while this tool is in the United
States.
This warranty gives you specific legal rights and you may also
have other rights, which vary, from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates,
IL 60179
DANGER: Do not use this dust collection system in a flam-
mable or explosive atmosphere. Do not use to collect metal
shavings or dust. Consult National Fire Protection Association
(NFPA) standards before setting up a dust collection system,
especially NFPA 664.
WARNING: For your own safety read all of the instructions
and precautions before operating tool.
WARNING: For your own safety read all of the instructions
and precautions for any dust collector used with this system.
CAUTION: Always follow proper operating procedures as
defined in this manual even if you are familiar with use of this
or similar tools. Remember that being careless for even a
fraction of a second can result in severe personal injury.
• Do not use power tools in dangerous environments. Do not
use power tools in damp or wet locations. Do not expose
power tools to rain.
• Work area should be properly lighted.
• Proper electrical receptacle should be available for tool.
Three prong plug should be plugged directly into properly
grounded, three-prong receptacle.
• Extension cords should have a grounding prong and the
three wires of the extension cord should be of the correct
gauge.
• Keep visitors at a safe distance from work area.
• Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to pre-
vent any unintentional use of power tools.
DANGER: The operation of any power tool can result in for-
eign objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses complying
with United States ANSI Z87.1 (shown on package) before
commencing power tool operation.
Check for shipping damage. If damage has occurred, a claim
must be filed with the carrier immediately. Check for complete-
ness. immediately report any missing parts to dealer. Remove
all components of shop dust collection system from shipping
carton.
Refer to Figure 2.
Locate and account for the following components:
* 2_/2x 24" Flexible hose (Key No. 1)
* Connector (12 each, Key No. 2)
* 45 ° Elbows (2 each, Key No. 3)
* 2_/2x 22" Plastic straight pipe (4 each, Key No. 4)
* Hangers (8 each, Key No. 5)
* Plastic "T" fittings (3 each, Key No. 6)
* Blast gates (4 each, Key No. 7)
* 2W' Hose clamp (10 each, Key No. 8)
* 2_/2x 72" flexible hose (4 each, Key No. 9)
* Grounding kit (not shown)
* Hardware bag (not shown)
BE PREPARED FOR JOB
• Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine.
• Wear protective hair covering to contain long hair.
• Wear safety shoes with non-slip soles.
• Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lens-
es. They are NOT safety glasses.
• Wear face mask or dust mask if operation is dusty.
• Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
PREPARE WORK AREA FOR JOB
• Keep work area clean. Cluttered work areas invite
accidents.
TOOLS NEEDED
• Phillips Head Screwdriver
• Portable Drill
• _/4"Drill Bit
• W' Drill Bit
• Hammer
NOTE: For masonry walls, use sixteen (16) masonry anchors
and masonry drill bit of proper size for anchors (not supplied).
SELECT SITE FOR SHOP DUST COLLECTION
SYSTEM
Refer to Figure 2.
Site for the Shop Dust Collection System should be located
as close to the woodworking machines as possible. Dust
Collector should be to the Left or Right of the machines and
Shop Dust Collector System should branch out to each
@Sears, Roebuck and Co. 2