Filter
Top Products
Warranty ......................................... 2
Safety Rules ...................................... 2
Unpacking ....................................... 3
Assembly ...................................... 3-5
Installation ....................................... 5
Operation ........................................ 6
Maintenance ..................................... 6
Troubleshooting ................................... 7
Parts Illustration and List .......................... 8-9
Espa_ol ...................................... 10-15
,, Do not use power tools in dangerous environments. Do not
use power tools in damp or wet locations. Do not expose
power tools to rain.
• Work area should be properly lighted.
• Proper electrical receptacle should be available for tool.
Three prong plug should be plugged directly into properly
grounded, three-prong receptacle.
• Extension cords should have a grounding prong and the
three wires of the extension cord should be of the correct
gauge.
• Keep visitors at a safe distance from work area.
• Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to pre-
vent any unintentional use of power tools.
ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL
If this Craftsman tool fails due to a defect in material or
workmanship within one year from the date of purchase CALL
1-800-4-MY-HOME® TO ARRANGE FOR FREE REPAIR.
If this tool is used for commercial or rental purposes, this war-
ranty will apply for only ninety days from the date of purchase.
This warranty applies only while this tool is in the United
States.
This warranty gives you specific legal rights and you may also
have other rights, which vary, from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates,
IL 60179
TOOL SHOULD BE MAINTAINED
• Always unplug tool prior to inspection.
,, Consult manual for specific maintaining and adjusting
procedures.
• Keep tool lubricated and clean for safest operation.
,, Remove adjusting tools. Form habit of checking to see that
adjusting tools are removed before switching machine on.
• Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform
their intended function.
• Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condi-
tion that may affect a tool's operation.
• A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)
DANGER: Do not use this dust collector in a flammable or
explosive atmosphere. Do not use to collect metal shavings or
dust. Consult National Fire Protection Association (NFPA)
standards before setting up a dust collection system, espe-
cially NFPA 664.
WARNING: For your own safety read all of the instructions
and precautions before operating tool.
CAUTION: Always follow proper operating procedures as
defined in this manual even if you are familiar with use of this
or similar tools. Remember that being careless for even a
fraction of a second can result in severe personal injury.
BE PREPARED FOR JOB
• Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine.
,, Wear protective hair covering to contain long hair.
,, Wear safety shoes with non-slip soles.
,, Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lens-
es. They are NOT safety glasses.
,, Wear face mask or dust mask if operation is dusty.
,, Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
KNOW HOW TO USE TOOL
• Use right tool for job. Do not force tool or attachment to do
a job for which it was not designed.
• Disconnect tool when performing service or maintenance.
• Avoid accidental start-up. Make sure that the switch is in
the OFF position before plugging in.
• Do not force tool. It will work most efficiently at the rate for
which it was designed.
• Leave hands free to operate machine. Protect hands from
possible injury.
• Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
• Do not overreach. Keep proper footing and balance.
• Never stand on tool. Serious injury could occur if tool is
tipped or if blade is unintentionally contacted.
• Keep hands away from moving parts.
• Know your tool. Learn the tool's operation, application and
specific limitations.
DANGER: The operation of any power tool can result in for-
eign objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses complying
with United States ANSI Z87.1 (shown on package) before
commencing power tool operation.
PREPARE WORK AREA FOR JOB
,, Keep work area clean. Cluttered work areas invite
accidents.
© Sears, Roebuck and Co.
2