Filter
Top Products
8
Figure 6
2. Insert the male end of the power
handle interface into the female
socket in the end of the extension pole
making sure that it is rmly seated.
(see gure 7) The interface is keyed
so that it will only go together one
way. The handle and pole should go
together easily. If you experience
resistance in putting them together,
check that the keys on the handle are
properly aligned with the slots in the
pole.
Figure 7
3. Grasp the pole rmly with one hand
and twist the lock ring on the power
handle to the locked position with the
other hand.(see gure 8)
Figure 8
To attach the saw head to the pole:
1. Twist the lock ring on the pole to the
unlocked position. (see gure 9)
Figure 9
2. Insert the male end of the pole
interface into the female socket in
the end of the saw head making sure
that it is rmly seated. The interface is
keyed so that it will only go together
one way. The pole and saw head
should go together easily. If you
experience resistance in putting them
together, check that the keys on the
pole are properly aligned with the slots
in the saw head.
3. Grasp the saw head rmly with one
hand and twist the lock ring on the pole
to the locked position with the other
hand. (see gure 10)