Filter
Top Products
Rechargeable Power Pack Crestron ST-BTP
Description
The Crestron high performance rechargeable power pack, herein referred
to as the ST-BTP, is designed to supply power to certain Crestron
wireless touchpanel models. Installation of the ST-BTP offers the
touchpanel user the freedom to roam without being confined to a
stationary power source (i.e., external power pack or docking station).
The table below provides a summary of leading specifications for the
ST-BTP. Weight is rounded to the nearest hundredth unit.
Leading Specifications for the ST-BTP
SPECIFICATION DETAILS
Operating Output Voltage
4.8 VDC, nominal
Composition
Nickel-Cadmium (NiCad) Cells
Estimated Length of Charge
Up to 3 hours of continual use (depends
Cycle (new unit with full charge)
on touchpanel configuration settings)
Estimated Life
Up to 300 to 1000 charge/discharge cycles
or three to five years of standby power
Optimal Operating, Storage, &
App
roximatel
y
68
o
to 86
o
F
(
20
o
to 30
o
C
)
Charge/Discharge Temperature
Weight 0.79 lb (0.36 kg)
As of the date of manufacture, the ST-BTP has been tested and found to
comply with specifications for CE marking.
NOTE: Due to memory effect of NiCad cells, Crestron recommends that
the ST-BTP be fully discharged for every 25 charge/discharge cycles.
The ST-BTP can be fully discharged while in the touchpanel (with
reserved join number 1036). Refer to "Fully Discharging the ST-BTP" on
page 5 for details.
Handling
WARNING: The rechargeable power pack contains toxic material
(cadmium), therefore do not incinerate or mutilate. In the event that the
battery electrolyte gets on skin or in eyes immediately flush with pure
water and consult a doctor.
2 • High Performance Rechargeable Power Pack: ST-BTP Operations Guide - DOC. 5746A