Filter
Top Products
44
UNPACKING
1. Remove the miter saw and all loose items from the
carton. IMPORTANT: DO NOT LIFT THE MITER SAW
BY THE SWITCH HANDLE AS THIS MAY CAUSE MIS-
ALIGNMENT. ALWAYS LIFT THE MACHINE BY THE
BASE OR CARRYING HANDLE. Fig. 2, illustrates the
machine and all loose items after they have been
removed from the carton.
1 - Miter Saw
2 - Wrenches for changing the blade
3 - Table lock handle
ASSEMBLY INSTRUCTIONS
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER SOURCE UNTIL
THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE ENTIRE OWNERS
MANUAL.
MOVING CUTTERHEAD
TO THE UP POSITION
1. Push down on switch handle (A) Fig. 3, and pull out
cuttinghead lockpin (B).
2. The cuttinghead (C) can then be moved to the up
position, as shown in Fig. 4.
Fig. 2
Fig. 3
Fig. 4
1
A
2
3
B
C