Filter
Top Products
55
ASSEMBLING
TABLE LOCK HANDLE
1. Thread table lock handle (A) Fig. 5, into the thread-
ed hole (B) of the arm bracket.
ROTATING TABLE
TO 90 DEGREE POSITION
1. Loosen table lock handle (A) Fig. 6, one or two turns
and depress index lever (B) to release 45 degree positive
stop.
2. Rotate table to the left until index stop engages with
the 90 degree positive stop (C) Fig. 6. Then tighten table
lock handle (A).
ASSEMBLING DUST BAG
(OPTIONAL)
1. Assemble dust bag (A) Fig. 7, to the dust spout (B)
making sure the wire ring (C) is engaged with the groove
in the spout.
FASTENING MITER SAW
TO SUPPORTING SURFACE
Before operating your compound miter saw, make sure
it is firmly mounted to a sturdy workbench or other sup-
porting surface. Four holes are provided, two of which are
shown at (A) Fig. 8, for fastening the saw to a supporting
surface.
When frequently moving the saw from place to place we
suggest that the saw be mounted to a 3/4" piece of
plywood. The saw can then be easily moved from place
to place and the plywood clamped to the supporting
surface using “C” clamps.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
A
B
A
BC
A
B
C
A