Filter
Top Products
11
OPERATING CONTROLS & ADJUSTMENTS
WARNING: FOR OPERATOR SAFETY, MAKE
CERTAIN THE DUST INTAKE PORT IS COVERED
WITH THE VACUUM HOSE BEFORE OPERATING
THE MACHINE. THE ROTATING FAN INSIDE THE
BLOWER HOUSING IS ACCESSIBLE THROUGH THE
DUST INTAKE PORT AND IS HAZARDOUS. MAKE
SURE INTAKE CAP COVERS THE INTAKE PORT
WHEN HOSE IS REMOVED. ALWAYS WEAR PROPER
APPAREL.DO NOT WEAR JEWELRY, AND KEEP
FINGERS AND ALL FOREIGN OBJECTS OUT OF
THE DUST INTAKE PORT.ALWAYS FOLLOW THE
SAFETY RULES OF THIS MANUAL.
STARTING AND STOPPING
DUST COLLECTOR
The ON/OFF power switch (A) Fig. 24, is located on the
side of the motor. To turn the machine “ON”, move the
toggle switch (B) towards the “ON” position. To turn the
switch “OFF”, move the toggle switch (B) towards the
“OFF” position.
LOCKING SWITCH IN
THE “OFF” POSITION
When the tool is not in use, the switch should be locked
in the “OFF” position to prevent unauthorized use. This
can be done by grasping the switch toggle (B) Fig. 25,
and pulling it out of the switch (A) as shown. With the
switch toggle removed, the switch will not operate.
However, should the switch toggle be removed while the
machine is running, the switch can be turned “OFF”
once, but cannot be restarted without inserting switch
toggle (B).
Fig. 24
Fig. 25
A
B
A
B
Fig. 22
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC TOOLS
Ampere Volts Total Length of Gauge of
Rating Cord in Feet Extension Cord
0-6 120 up to 25 18 AWG
0-6 120 25-50 16 AWG
0-6 120 50-100 16 AWG
0-6 120 100-150 14 AWG
6-10 120 up to 25 18 AWG
6-10 120 25-50 16 AWG
6-10 120 50-100 14 AWG
6-10 120 100-150 12 AWG
10-12 120 up to 25 16 AWG
10-12 120 25-50 16 AWG
10-12 120 50-100 14 AWG
10-12 120 100-150 12 AWG
12-16 120 up to 25 14 AWG
12-16 120 25-50 12 AWG
12-16 120
GREATER THAN 50 FEET NOT RECOMMENDED
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC TOOLS
Ampere Volts Total Length of Gauge of
Rating Cord in Feet Extension Cord
0-6 240 up to 50 18 AWG
0-6 240 50-100 16 AWG
0-6 240 100-200 16 AWG
0-6 240 200-300 14 AWG
6-10 240 up to 50 18 AWG
6-10 240 50-100 16 AWG
6-10 240 100-200 14 AWG
6-10 240 200-300 12 AWG
10-12 240 up to 50 16 AWG
10-12 240 50-100 16 AWG
10-12 240 100-200 14 AWG
10-12 240 200-300 12 AWG
12-16 240 up to 50 14 AWG
12-16 240 50-100 12 AWG
12-16 240
GREATER THAN 100 FEET NOT RECOMMENDED
Fig. 23