Filter
Top Products
13
TRANSPORTATION AND
STORAGE
1. The dust collector features a convenient carrying
handle with rubber grip (A) Fig. 29, which allows the unit
to be carried easily from one job area to another.
IMPORTANT: THE DUST COLLECTOR WEIGHS
APPROXIMATELY 46 LBS. CARE SHOULD BE TAKEN
WHEN LIFTING AND TRANSPORTING THE MACHINE.
2. In addition to the carrying handle, the machine
features a storage mounting bracket (B) Fig. 30, with a
hole for mounting the dust collector to a wall or wooden
support (when not in use).
Fig. 29
Fig. 30
MAINTENANCE
WARNING: Before any maintenance or service is performed, be sure the dust collector is discon-
nected from the power source to prevent accidental starting. All maintenance other than the items recommended in
this manual should be performed by an authorized Delta Service Center.
1. WARNING: Always disconnect the machine from the power source before performing any maintenance
procedures.
2. The condition of the dust bag should be checked periodically for damage and emptied on a regular basis. Do not
transport the machine with a full dust bag.
3. Clean and apply a dry silicone lubricant monthly to the impeller to remove any dirt or build-up of pitch, gum and
wood shavings.
4. WARNING: Always make sure that the intake cap (A) Fig. 31, covers the intake port when the hose is not
connected to the machine.
Fig. 31
A
B
A