Filter
Top Products
11
Fig. 27
Fig. 28
Fig. 29
ASSEMBLING DUST
COLLECTION BAGS TO
DRUMS
1. Insert bag clamp (A) Fig. 27, through the loops of the
dust bag (B).
3. Clamp the dust collection bag (B) Fig. 29, around
drum (C) with the locking band (F). Assemble the
remaining dust collection bag to the drum at the other
side of the dust collector. NOTE: Make certain locking
band (F) Fig. 29, is positioned in the channel of drum (C)
before fastening clamp (A).
2. Place the opening of the dust bag (B) Fig. 28, over
the bottom lip of drum (C) as shown.
Fig. 30
MODEL 50-861 ONLY
MOUNTING SWITCH
CONTROL BOX
1. Remove switch controller cover (A) Fig. 30.
2. Align the three mounting holes at the back of the
control box, with three mounting holes in front support
(not shown) and fasten switch control box to machine
with three sheet metal screws (B) Fig. 32.
A
B
C
B
A
B
C
A
F