Filter
Top Products
4
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax.
1. Base
2. Side Supports (2)
3. Hardware for Mounting Side Supports
Includes: 5/16-18 x 5/8" Hex Head Screws (4), and 5/16" Lockwashers (4)
4. Cross-Member Supports (2)
5. Hardware for Mounting Cross-Members
Includes: 5/16-18 x 5/8" Hex Head Screws (4), 5/16" Flat Washers (4), 5/16"
Lockwashers (4), and 5/16-18 Hex nuts (4 )
6. Hardware for Mounting Drum Supports:
Includes 5/16-18 x 5/8" Hex Head Screws (16), 5/16" Lockwashers (16), 5/16" Flat
Washers (8), and 5/16-18 Hex nuts (8)
7. Drum Supports (4)
8. Hardware for Mounting Caster Assemblies to Base.
Includes: 5/16-18 x 5/8" Hex Head Screws (24), 5/16" Lockwashers (24), and 5/16"
Flat Washers (24)
9. Caster Assemblies (6)
Fig. 2
1
2
3
4
5
6
7
8
9