Filter
Top Products
6—ENG
GENERAL INFORMATION
You have purchased a complete compressor outfit
consisting of an air compressor, air tank, electric motor,
and associated controls and instruments. The outfit you
have selected is a stationary model and contains a two
stage air compressor pump.
Your new compressor outfit can be used for operating
paint sprayers, air tools, grease guns, air brushes,
caulking guns, sandblasters, inflating tires, etc.
An air pressure regulator is usually necessary for most
applications. An air line filter is normally required for
removal of moisture and oil vapor in compressed air
when a paint spray gun is used.
An in-line lubricator is often required for air tools to
prolong tool life.
Separate air transformers which combine the functions
of air regulation and/or moisture and dirt removal should
be used where applicable.
A regularly scheduled program of preventive mainte-
nance will help provide the long life that has been
designed into your compressor outfit. Before operating
or performing any maintenance on your compressor,
refer to this manual. To keep your compressor in good
working order, refer to these publications often and
perform preventive maintenance steps as recommended.
ON-RECEIPT INSPECTION
Each air compressor outfit is carefully checked before
shipment. With improper handling, damage may result
in transit and cause problems in compressor operation.
Immediately upon arrival, check equipment for both
concealed and visible damages to avoid expenses being
incurred to correct such problems. This should be done
regardless of any visible signs of damage to the shipping
container. Report any damages to carrier and arrange for
inspection of goods immediately.
For the location or a listing of the nearest DeVilbiss Air
Power Authorized Warranty Service Center, call our toll
free number at 1-800-888-2468, Ext. 2, then 1.